Electric Operated Discharge Control Valve for IC card HVAC water equipment drinking water water filter industrial humidifier

2-way/3-way electric operated Valve 1/4" to 1",IP65, with differnt wiring,3-6Vdc,ac/dc9-24V,220V, 1.0Mpa                        

Technical parameters:

•  
  • Size: 1/4 to 1 inches
  • Voltage: 3-6vDC,AC/DC9-24v,220V                     
  • Material: stainless steel (304, 316), brass
  • Open/close time:3sec
  • Working pressure: 1.0 mPa
  • Torque output: Q-1.5NM, N-2NM
  • Control mode:2,3,5 wires                                    
  • End:BSP&NPT
  • Medium temperature: 0-90°C
  • Actuator rotation: 90 degree
  • Rotation direction: double acting
  • Low working current: <80mA
  • Working medium:water,air,gas.
  • Product life: 100,000 times
  • Special function:position indicator;quick open
  • Enclosure:IP65
  • Main export areas:Europe,Asia,North America, South America,Mid East,Oceania,Africa

You can choose what you want from below wiring:

Features:

   1. Smart shape,perform reliably,brass gear,PPO parts,large output torque,long product life for 100,000 times.

   2. Electrical limit and machinery limit design,accurate position,avoid gear with switch.

   3. Multi-angle assembling,easy to install.

   4. Float ball structure,no leakage,especially suitable for heavy pollution conditions.

5.Good substitution for solenoid or pneumatic valve.

   6. High protection class,can be worked in moist conditions. IP65.

Situable for :

1. IC card meters,heat energy meters,air-warm valve.
2. 2.HVAC and fire works.

3.  Water equipment,auto-control watersystem,industrial mini-auto equipment, Small equipment for automatic control

1. Irrigation equipment,drinking water equipment,solar water heaters,washing machines,water heaters,industrial humidifier.                  
2. Replacing solenoid valve, particularly when solenoid cannot work reliably,the circumstance pneumatic valve can not work.
3. Multiple voltage and control mode, applicable to a variety of occasions.

Other illustration:                                         

• Material of main parts:
• Actuator: heat-resistant ABS
• Sealing: PTFE, silicon rubber ball seat, EPDM and NBR stem seat, NBR o-rings .
• Body: brass or stainless steel
• Ball: brass or stainless steel
• Stem: brass or stainless steel

mini motorized valve, actuated valve, motor operated valve, motor actuated valve, automatic valve, control valve, shut off valve, actuator valve, electric operated valve